SELF-ADHESIVE PROTECTIVE MEMBRANE FOR BUILDING ELEMENTS
DEFENCE ADHESIVE 200
The product, once applied, is invisible and allows both the markings of the powder tracer on the panel and the mounting holes to be easily seen.
The membrane protects the timber without interfering with either handling or site operations.
The surface treatment makes the product waterproof. On site, the membrane resists abrasion and trampling.
With the self-adhesive surface of the membrane, installation is quick and easy. In case of a mistake during installation, the membrane can be repositioned and reapplied without difficulty. Protection of building elements is guaranteed for 12 weeks.
Videos
Documents
Technical data sheets
|
|---|
DEFENCE ADHESIVE 200
| CODE | description | g/m² | liner | H
[m]
|
L
[m]
|
A
[m²]
|
H
[ft]
|
L
[ft]
|
A
[sft]
|
pcs./pallet |
|---|---|---|---|---|---|---|---|---|---|---|
| DEFA200 | DEFENCE ADHESIVE 200 15/130 | 200 | 150/1300 | 1.45 | 50 | 72.5 | 4' 9 1/8'' | 164 | 780 | 22 |
Technical Data
| Property | Standard | Tested Values | USC Conversion |
|---|---|---|---|
| Mass per unit area | EN 1849-2 | 200 g/m² | 0.66 oz/ft² |
| Thickness | EN 1849-2 | ca. 0,25 mm | ca. 10 mil |
| Water vapour transmission (Sd) | EN 1931 | 2,5 m | 1.399 PERM |
| Resistance to nail tearing MD/CD | EN 12310-1 | > 60 / 65 N | > 13 / 15 lbf |
| Watertightness | EN 1928 | conforming | - |
| Thermal resistance | - | -40 / 80 °C | -40 / 176 °F |
| Reaction to fire | EN 13501-1 | class E | - |
| Density | - | ca. 800 kg/m³ | - |
| Water vapour resistance factor (μ) | - | ca. 10000 | - |
| Exposure to weather | - | 12 weeks | - |
| Elongation MD/CD | EN 12311-1 | > 40 / 40 % | - |
| Tensile strength MD/CD | EN 12311-1 | > 120 / 80 N/50mm | > 14 / 9 lb/in |
| Application temperature | - | 5 / 25 °C | 41 / 77 °F |
| Storage temperature (1) | - | -5 / 35 °C | 23 / 95 °F |
Specifications
Supply and installation of vapour control membrane, type DEFENCE ADHESIVE 200
Composition:
- EVA coating and PP protection layer
Properties:
- Mass per unit area (g/m2) : 200
- Water vapour transmission (Sd) (m) : 2,5
- Tensile strength MD/CD (N/50mm) : >120/80
- Elongation MD/CD (%) : >40/40%
- Resistance to nail tearing MD/CD (N) : >60/65
- Watertightness (class) : conforme
- Water column (cm) : -
- VOC emissions (COV) (% (class A+)) : -
- Driving rain test : -
- UV resistance with open joints up to 50 mm wide exposing no more than 40 % of the surface : -
- Temperature resistance (°C) : -40/+80
- Reaction to fire (class) : E
CE marking in accordance with EN 13984
DEFENCE ADHESIVE 200 it can be used for temporary protection.
The application surface must be dry, free of dust and grease, and not be anti-adhesive. Surface elements must be removed so that the membrane is not damaged during application.
During application, pressure must be applied to the membrane to ensure proper adhesion. To prevent rainwater accumulation on the membrane, it is necessary to design the building water drainage. 15 cm of overlap. Possibility of waterproofing the element joint using INVISI60/100/200 wide pre-cut tapes.
Composition
| top layer | - |
|---|---|
| bottom layer | non-woven PP fabric |
| GLUE | acrylic dispersion without solvents |
| release liner | removable plastic film |
